Dynamips Lab - Authorized Study Guide For Bsci

Description

TOPOLOGY


LAB from BSCI Self Study Guide




hxxp://rapidshare.com/files/76146464/CCNP_-_BSCI_Lab.rar.html
hxxp://rapidshare.com/files/76149040/Authorized_Self-Study_Guide_BSCI_642-901_3rd_Ed.pdf.html

Configuration exercise check the Appendex b.

Package include:
-Initial Configuration
-Dynagen Net file
-IOS


Requirements:
-Dynamips 2.8RC2 & Dynagen
-Atleast 1Gb Ram

Enjoy...

Good Job. Thanks for sharing.



Thanks for share . It's very good

great share!!!!
thanks very much!

wow u r the best

thanks for the lab its wonderful. could u also upload the bsci self study guide pdf too.

thanks mate,

fawaz



Done as requested...



I didn't understand how nice a share this was until I saw that its the AUTHORIZED Study Guide for BSCI, which is different from the Official Study Guide. And, this was not even available online for months. Thanks!!

Dear Bro,

Thanx for the share. I am able to download the Study Guide but not the Lab.





Every time i try to download from the above url, it throws an error.

Can you please upload it again.

Tnx in advance




Link are okey...




Gr8, was able to download. Great Effort.

It is really a big Lab, tried on my PIV 1.5G PC......... It just started freaking out.....

But works fine on my Quad.

Tnx.

unable to download lab link Please upload again

Thanks

^^^
same here unable to download the lab. Pl reupload.


I'm also unable to download the lab. Please upload to rapidshare.

hxxp://rapidshare.com/files/76146464/CCNP_-_BSCI_Lab.rar.html
hxxtp://rapidshare.com/files/76149040/Authorized_Self-Study_Guide_BSCI_642-901_3rd_Ed.pdf.html



Thank you brother!

Oh,
That's Great ... I'd like to ask if there is any labs for BCMSN Exam....!
It will be a favor
Thx

I've downloaded the lab files but i can't run the lab, I have dynamips running on my laptop, can someone help me on this

post the error... have you run the dynagen server?

thx

What's beyond me is why in the new (4th edition) of hte BSCI study guide, they removed all the LABs at the end of each chapter! arg!

thank you ... great share...







GREAT WORK, PLS I AM STUDYING FOR ISCW, CAN I HAVE THE LAB FOR IT?

Hi,

Could you please upload the Dynamips 2.8RC2, i only see a 2.8RC1 in the sourceforge site.
Please help me as I could not make it work. I tried it and got this:




Thanks!

download dynamips from
hxxp://dynagen.org/interim_builds/



i m not able to open it.

how to open router

after typelist it shows nd
frsw is n/a and all router is stopped

pls guide me






Please read hxxp://dynagen.org/tutorial.htm

hi TubigSuwah,

thanks man

now its working

hello Tubig Suwah,

You have uploaded a fantastic share, thankyou

If you have anything similar for BSMSN labs, that we can use plz post here.

Once again, thx for the share

I've setup the labs etc etc on this and I'm getting a problem...here is the post that I put on hacki.at..does anyone have any further info:

================================================================================
====================

I am having a problem with my frame-relay part of my lab for the BSCI exam, I'm not an expert in everything here but I have set a good enough network up on my linux box and everything appears to be workign apart from the frame-relay part - to which i want to get working so that I can carry on.

Here is my .net file: http://internetworkpro.org/pastebin/1880 for some viewing, my configs are saved infile under base64 encoding...

what I am trying to do is ping from p1r1 to bbr1 and i get this:

P1R1#ping BBR1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.31.1.3, timeout is 2 seconds:
.....


Success rate is 0 percent (0/5)


interface Serial1/0.1 multipoint
description - Frame Relay DLCI 111 and 112 for Pod 1
bandwidth 64
ip address 172.31.1.3 255.255.255.0
ip rip send version 1 2
ip rip receive version 1 2
ip ospf network non-broadcast
frame-relay map ip 172.31.1.1 111 broadcast
frame-relay map ip 172.31.1.2 112 broadcast
end

BBR1#sh int s1/0.1
Serial1/0.1 is down, line protocol is down
Hardware is M4T
Description: - Frame Relay DLCI 111 and 112 for Pod 1
Internet address is 172.31.1.3/24
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY
Last clearing of "show interface" counters never

BBR1#sh run int s1/0
Building configuration...

Current configuration : 173 bytes
!
interface Serial1/0
description - Interface for Frame Relay Multipoint
no ip address
encapsulation frame-relay
serial restart-delay 0
no frame-relay inverse-arp
end



Can anyone think to see what I am doing wrong here?

Thanks in advance,

Tam.

Hi,
I have problem when I start dynagen and give list, all devices are listed but when I start any device - start P1R1 then in first control windows appear something this:


is this problem with IOS image?

thank you sooo much it is very helpful.Can you share "BCMSN" too plz




theres no problem there at all...did you do a telnet to P1R1 after that? as that is what you are supposed to do

telnet BBR1 --> then 'control' windows give me:

and in telnet BBR1 window I have:

and notthing happens, cpu working all the time on 100%




hit return a few times mate see what happens it should pop up...



Hi Tam,

i think you should add this change in your .net file

[[FRSW FRSW]]
1:111 = 3:111
2:112 = 3:112
4:121 = 6:121
5:122 = 6:122

waiting for your feedback
Khalidov





On page 56 of the study guide, under P1R1#sh ip route it lists rip route 172.31.2.0 via 172.31.1.3. My setup doesn't do this and i assume it is because the frame switch isn't running rip. just started playing with dynamips and I am not able to console into the frame switch. Is there something I'm missing? Is this even possible, thanks in advance for the replies.

you can't telnet the fr-sw. this version use the build-in frame-relay capability of dynamips not the frame-relay emulate one.

Actually the DLCI is wrong. Take a look on the topology image and compare it to the FRSW switch DLCIs in the .net configuration. You have two ways to solve your problem: Changing the DLCIs numbers on the .NET file or configuring the DLCIs on each interface following the topology image. I think changing the config is better.

Below what I did:

On BBR1:

remove the statements of the se1/0.1 as shown below:
no frame-relay map ip 172.31.1.1 111 broadcast
no frame-relay map ip 172.31.1.2 112 broadcast

Add the statements below as shown below:
frame-relay map ip 172.31.1.1 301 broadcast
frame-relay map ip 172.31.1.2 302 broadcast

Now, you have to correct the P1R1:

no frame-relay map ip 172.31.1.3 111 broadcast
frame-relay map ip 172.31.1.3 103 broadcast

It's done!

Note that the DLCI number on each interface must be the local DLCI shown in the topology image. For example, P1R1 S1/0 have to be configured using the DLCI 103. P1R2 se1/0 have to be configured using the DLCI 203 and so on.
The IP address on the frame-relay map must be the neighbor interface address (interface of the remote router).

You have to correct the other routers. (P1R2, P2R1, P2R2, BBR1 and BBR2)

also remove the frame-relay maps of the s1/0.2 interface on BBR1


Actually, I just have tested the correction of BBR1 and P1R1. When I do all corrections, I post here.

Regards,

Hi TubigSuwah, Great share indeed!!

Do you have any labs for ISCW and ONT? I'm sure it'd be appreciated my many here

Hi TubiqSuwah,

Could you please let me know where is the Appendix b.

Thanks and Regards,
IT Professional.

great share.. thanks


I'm started study for the BSCI and I want to do this lab, but I have a question. I have all the files download and I'm using GNS3 and I want to know if I suppose to start the configuration from the beginner. Also, I don't see what is the goal for this lab. I would appreciate if someone tell me what is the goal for this LAB. Thanks

Disclaimer:
Contents of this page are indexed from the Internet. All actions are under your responsability. Email us to report illegal contents or external links and we'll remove them immediately.

Please check the description for download links if any or do a search to find alternative books.

Can't Download?
Please search mirrors if you can't find download links for "Dynamips Lab - Authorized Study Guide For Bsci" in "Description" and someone else may update the links. Check the comments when back to find any updates.

Search Mirrors
Maybe some mirror pages will be helpful, search this book at top of this page or click here to find more info.

1. Ebooks list page : 1871
2. Building Scalable Cisco Internetworks (BSCI) (Authorized Self-Study Guide) (3rd Edition)
3. [request_ebook] Building Scalable Cisco Internetworks (BSCI) (Authorized Self-Study Guide), 3rd Edition
4. [share_ebook] Cisco Voice over IP (CVoice) (Authorized Self-Study Guide) (2nd Edition) (Self-Study Guide)
5. Cnap Bsci 642-901 Version 5.0 Dynamips Eigrp Lab Topology
6. Cisco Voice Over Ip (cvoice) (authorized Self-study Guide) (2n
7. Cisco Voice over IP (CVoice) (Authorized Self-Study Guide)
8. cisco-voice-over-ip-cvoice-authorized-self-study-guide-3rd-edit
9. Cisco.press.authorized.self.study.guide.cvoice.2nd.edition.sep
10. Cisco Voice over IP (CVOICE) (Authorized Self-Study Guide) (3rd Edition)
11. Cisco IP Telephony (CIPT Authorized Self-Study Guide) (2nd Edition)
12. Cisco IP Telephony (CIPT Authorized Self-Study Guide) (2nd Edition)
13. Cisco Voice over IP (CVoice) (Authorized Self-Study Guide) 2nd Edition
14. cisco.press.cipt.authorized.self.study.guide.2nd.ed.oct.2006
15. Authorized Self Study Guide Cisco Voice over IP CVoice 2nd Edition Sep 2006
16. Designing Cisco Network Service Architectures (ARCH) (Authorized Self-Study Guide)