Pass4side SUN 310-880 Latest ExamDEMO -4

SUN 310-880 SUN Certified Senior System Support Engineer
Updated: 2008-10-10
More Infomation Visit: http://www.pass4side.com
16. A customer has centralized platform and domain logging on a Sun Fire 6800 to a log

server called ’sfv210-a?
The customer wants to keep the platform and domain messages separate, so they have

configured the System
Controller on the Sun Fire 6800 to use the syslog facility ‘local0′ for the platform

messages, and ‘local1′ for the
domain messages.
What two lines should be added to the /etc/syslog.conf file on the log server ’sfv210-

a?to separate the two types of
syslog messages? (Choose two.)
A. local0.notice /var/adm/messages
B. local1.notice /var/adm/messages
C. local1.notice /var/adm/messages.local1
D. local0.notice /var/adm/messages.local0
E. local0.notice sfv210-a:/var/adm/messages.local0
F. local1.notice sfv210-a:/var/adm/messages.local1
Answer: CD

17. You are configuring the eri0 network interface using the ifconfig command with the

options netmask + and
subnet mask 255.255.255.0.
# /usr/sbin/ifconfig eri0 netmask +
To verify the system is properly set up you issue an ifconfig -a command. You notice

that the eri0 network
interface has the netmask incorrectly set for 255.255.0.0.
Which file do you need to check first?
A. /etc/hosts
B. /etc/netmasks
C. /etc/hostname.eri0
D. /etc/nsswitch.conf
Answer: B

18. A user of DHCP is having trouble connecting to a DHCP server. After analyzing the

system, you find the
DHCP daemon is NOT running. Which command should you use to start the DHCP daemon?
A. /usr/lib/inet/dhcpd
B. /etc/rc2.d/dhcp start
C. /etc/init.d/dhcp start
D. /etc/init.d/S45dhcp start
E. /etc/rc2.d/S99dhcpagent start
Answer: C

19. You have connected a workstation’s ‘ce0′ interface into a network with a DHCP

service. Which command
should you issue to have your workstation receive a DCHP IP address from the server?
A. dhcp get ce0
B. dhcpconfig ce0
C. ifconfig ce0 plumb dhcp
D. ifconfig ce0 plumb auto-dhcp
Answer: D

20. You receive a call from a customer who states that their Solaris 9 NTP client is

not syncronizing to their NTP
server. Which three commands should you use to investigate further? (Choose three.)
A. ntpq -p
B. svcs -l xntp
C. ps -ef | grep xntp
D. cat /etc/inetd/ntp.client
E. cat /etc/inetd/ntp.server
F. grep xntpd /var/adm/messages
Answer: ACF